Aqua Signal Series 42 replacement

Kub Cat

Active Member
Joined
19 Aug 2018
Messages
67
Location
Sydney Australia
Visit site
My 2003 Aqua Signal have cracked housings and they are discontinued.

They are a semi recessed design which means there will be a hole when I remove it.

They are also quite large at 125mm x 125mm.

It is probably time for an LED replacement.

Aqua Signal only offered their Series 44 as a replacement, which is a bit smaller and in my opinion quite ugly.

Any suggestions on a suitable large LED replacement?
7E988C8A-00D9-4F27-AB61-8E2A23099BD3.jpeg
 
How about a smaller but equally as powerful smaller light with a nice stainless or plastic backing plate to cover the old hole ?
 
How about a smaller but equally as powerful smaller light with a nice stainless or plastic backing plate to cover the old hole ?

Yes, that is plan B.

As there were lots of these lights made and I imagine they are all getting older and brittle, hopefully someone has done a swap and can post a photo.
 
I got a replacement from Paul at Coastal Rides last year, top service and a good price, even better when I fitted a bright LED inside it.
 
Top