Another antifoul question

[EdgarCove]

Hello all....After sanding (timber clincker) hull...I have applied 3 coats of International Primocon primer.
My questions are.... 1) What antifoul is recommended and should I stick with 'International'?
2) Do I apply the antifoul directly on top of the Primocon...or is there a undercoat first ( and if there is..what type?)
3) What 'undercoat' should I use above the waterline (assuming that I use International)
4) |What 'topcoat' should I use
I have asked these questions because of all the differing paints available....and I tried to speak to a 'technical' person at International without success.

Many thanks...Steve

 

[Egret]

Speak to someone locally to see what works best at your mooring location then follow instructions for that paint, particularly thicknesses.

 

[Tranona]

Everything you need to know is here international-yachtpaint.com/au/en there is a guide you can download and each product has a data sheet and application guide showing what preparation is needed and any required priming or undercoating

 

[Chiara’s slave]

Everything you need to know is here international-yachtpaint.com/au/en there is a guide you can download and each product has a data sheet and application guide showing what preparation is needed and any required priming or undercoating

That’ll be great as long as the chap is Aus based. Our products in UK are different.

 

[Tranona]

Here is the UK version international-yachtpaint.com/gb/en Essentially the same for what the OP wants