A big thank you to kwacka and co

[Kilter]

For sorting out the RIB.

Now looking forward to charging around like a hooligan again!

 

[Searush]

Mind the shore at Trwyn Ddu & the new outfall spike at Beaumaris then.

 

[Philiz]

Glad you're back in business Robin.

 

[LittleShip]

For sorting out the RIB.

Now looking forward to charging around like a hooligan again!

Pah ! There only one up from a water flea

Sorry I couldnt entertain yesterday but I was stripping Little Ship to find a broken wire run a new one in the end it was easier


Tom

 

[Kawasaki]

Pah ! There only one up from a water flea

Sorry I couldnt entertain yesterday but I was stripping Little Ship to find a broken wire run a new one in the end it was easier


Tom

Oops!
Didn't see this post
Ref wires an stuff
Just mentioned on the 'Pull is Strong' post

Yeh Tom, it's been all about duff wires this weekend
Philiz an me spent a ferw hours diagnosing summat we didn't want to diagnose if yer gets me drift!
The Kilter rib had run beautifully through the Swellies an on to PD
Then it refused to fire.
Dead as doornail.
So thanks to you an Liz for transport and tea at a time of great stress an embarassment

Noticed Tom as we towed the RIB away, your engine running and your nav lights on in the Dock
What was Your wiring snag then?

 

[Kilter]

Mind the shore at Trwyn Ddu & the new outfall spike at Beaumaris then.

Reckon we should cross it OK on the plane!

Thanks Philiz for your support and help

Pah ! There only one up from a water flea

Wanna race then?

run a new one in the end it was easier

Tell us about it!

 

[LittleShip]

Reckon we should cross it OK on the plane!

Thanks Philiz for your support and help

Wanna race then?
yep! start at PD and finish at Fort William

Tell us about it!

Seems one of the wires that's original had a break somewhere along its length from the helm to the flybridge. Very unusual as it was giving 12v on the meter but nothing when connected to the lights, ended up threading a separate wire through and cutting off the one that was giving problems.

At first I thought it was a dry joint (and it still maybe) but if it is I cant find the joint.

First time I have had an electrical problem on LS since I rebuilt her !! (touch wood)
Alls well that ends well and it works again now and all the electrics have Corrosion Block on them now

Tom