12 v Junction Boxes

[RichardPerou]

Past bodgery has led to too many wires attached to a single fuse. I want a safer way of connecting this. Is there a fused multiple fuse junction box around that will sort this out?

 

[savageseadog]

I bought some like this on ebay, really good with glands

http://www.ebay.co.uk/itm/Outdoor-I...ighting_Lamps_Lighting_SM&hash=item4ad1328d0f

I think mine were significantly cheaper I'll see if I can find out where they were from

 

[David2452]

If I understand correctly this is what you need, connect the feed and then the seperate fused supplies out of it, the glow when blown fuse LEDs are a useful feature. http://www.ebay.co.uk/itm/6-Way-Bla...tEquipment_Accessories_SM&hash=item2c661216cd

 

[RichardPerou]

Thank you for the advice

 

[fisherman]

I used this:
http://www.force4.co.uk/7605/Blue-Sea-Blade-Fuse-Block---6-Way-with-Negative.html

 

[maxi77]

I used this:
http://www.force4.co.uk/7605/Blue-Sea-Blade-Fuse-Block---6-Way-with-Negative.html[/QUOT

I have used this, perhaps not quite as elegant and needs another negative bus but significantly less expensive and available for both sizes of fuse and in 4, 6, &10 ways
http://cpc.farnell.com/jsp/search/productdetail.jsp?SKU=FF02308

 

[FullCircle]

Thank you for the advice

I used Blue Seas kit all over my boat. Excellent build quality, and a lot easier to use because of screwed rings rather than slip on crimps. But they are expensive.

 

[Storyline]

I used Blue Seas kit all over my boat. Excellent build quality, and a lot easier to use because of screwed rings rather than slip on crimps. But they are expensive.

+1