Recent content by webcraft

  1. webcraft

    No genoa track - cheek block, low friction snap shackle or low friction ring?

    Avy-J has no genoa track, and I do not intend to fit one. The genoa sheets are led to the winches via blocks shackled onto the toerail. The genoa is a fairly high-cut yankee, so the lead is not too bad with one or two reefs rolled in, but obviously any more than that and I would like to move...
  2. webcraft

    Tank level gauge is showing inverted values

    Or get used to it working backwards, like we did. - W
  3. webcraft

    Running cables down the outside of the mast...

    I used plastic electrical conduit, supplemented the stickyback with sealant and painted it gold to match the anodising. It's lasted 6 years so far (he said, touching wood . . .) - W
  4. webcraft

    Matsutec AIS - where to get HP33A (not HP528A)

    He got back to me straight away, but no joy. - W
  5. webcraft

    Whilst walking in the marina I saw these 2 horrors

    The There is more space on the pontoon than on my boat
  6. webcraft

    Matsutec AIS - where to get HP33A (not HP528A)

    It's not the GPS aerial, I have tried a new one. - W
  7. webcraft

    Matsutec AIS - where to get HP33A (not HP528A)

    As some of you will know from a previous thread, our HP33A on Avy-J is suffereing from the dreaded 'no GPS signal' and we are going to have to replace it. Thing is, I went to a lot of effort to neatly flush mount it and the 528A has a completely different footprint. Is it sensible to try to get...
  8. webcraft

    antifoul preparation, washing, wet sanding etc etc

    If you want to get rid of the old powdery antifoul and get down to a hard, smooth substrate thst is maybe halfway through the previojs coat as well, use a Bahco scraper or similar. I did this a month ago and got down to a hard multi-coloured surface by applying just the right amount of...
  9. webcraft

    Prop dezincification

    Ordered one. - W
  10. webcraft

    Prop dezincification

    That looks like a very handy tip. Does it stay on a whirling prop and stop fouling on a stationary one as well? - W
  11. webcraft

    Prop dezincification

    When we were out of the water a month ago I noticed a pinkish tinge to our 3 year old prop and a bit of a dull sound when tapped. I blamed myself for not having fitted a shaft zinc when the prop was fitted 33 months ago, and duly fitted one. We then had to lift out a month later, a month we...
Top