superheat6k

My boat has Floscan 6000 series flow meters. Likely due too lack of boat use one of these is not reading any flow, the other is not very...

The cheap chinese copy of the Racor is mostly made by a company called Rongsun. When my firm overhauled all the fridge system...

As already mentioned if the reason the thing was not working is because it has lost its gas, then simply charging more will only provide...

You likely missed a bullet as changing these tanks is a job for a previous owner ! I personally would avoid VP engines as these all...

Good luck. Happy to answer any questions on these excellent boats. Watch out for P bracket alignment and mild steel fuel tanks. Wear in...

i am a bit rusty on the Corvette members now, but try the Owners group - might be listed. main groups.io Group

I nearly bought one, but decided it was not for me during the sea trial, although I am still not sure it it was the boat or the owner...

Be very careful with the tube nest. The core cost me ~ £1,100 when I had to replace one on my Turbo 36 ~ 2013. Rare as hens teeth, and...

So I have owned Billy Ruffian for two years during which for various reasons my boat usage has been minimal. On checking the boat last...

loctite 55 ptfe cord or my preferred loctite 577 as it seals and sticks as well

Whereas the 'Neutral' conductor should be tied to Earth at the position of generation, ideally with the casing of the generator, with...

I would be very surprised if you found a gazumper in the current boat market environment. But IMHO using the RYA /. MCA standard form of...

I assume this box resides within the overall fridge. If so the fridge may get to temperature a bit faster, but the overall cooling...

I myself have never fitted a brass gate valve nor ball valve, and regard them a serious hazard. My personal preference now is for...

Hit with a hammer and if the boat sinks then I would change it. More seriously the valve pictured was serving the aft heads outlet on...