Refueler's latest activity

taking comments here ... I thought to have a look at LiFe batterys ... Voltrium 100 A/Hr with BMS / Bluetooth ready drop in to car /...

I have had similar happen ... not with a Redflash though .... batterys left long period ... my fault not making sure stayed full charge...

Must be about time to change oil in my old Perkins 4-107 ... its been about 5 - 6 yrs !!!! My Yanmar 2GM will be during layup ...

Same club .... different boat. Conqubin 38cr When yard was given job of cleaning up and antifoul .... part was to remove filler patches...

I only need ~2500+ GW ..... and boat length 24ft

Anyone ever changed ring gear on one of these ??? Does annoy sometimes when trying to start engine and you need 5 or 6 hits of the key...

Rogers point of water ingress is important. But generally any internal damage cannot be assessed dropped or in place - only by cutting...

The boat originally had a (B10) AQ130 4cyl VP 130HP unit ... previous owner swapped it out for the 6cyl AQ170 ... which TBH - is a bit...

Present engine 6cyl Gasoline VP AQ170A driving a 280 leg ..... Would there be a Diesel engine that could basically bolt straight in as...

One problem I will need to solve is the source of the replacement pipework ... clips and insulation are not a problem as that's...

Emailed dealer to see if any winter price deal on the RESPO piekabe 2700V802T230 | Laivu Depo - seeing as most boats are lifted now...

Nanuk Diesel for supply to Alaska and various arctic regions is Kerosene. DPK to be exact ... Dual Purpose Kero. I oversaw supply...

Cheap market Trouser braces can supply clips and the webbing .... no need wait ChinaPost ...

"*I'm not sure that there is such a thing as a ready to go boat. Even a new one will need setting up to your needs, and a good...

I have the full kit from Vevor ... but will source better pipework / clips etc .... That's the main points covered by so many videos /...