Refueler's latest activity

I think one factor needs to be considered ..... if I understand OP's need ... its for a secure but easily applied ... easily released...

Was admitted to Hospital yesterday ... damaged nerve right side of face ... likely due to being too long out in strong cold winds ...

My LPG system has deck exhaust outlet ahead of mast on stbd side. When not used - its not used by me - it has a 'top hat' to stop water...

Rolling Hitch is designed as a one way resistance hitch ... it can soon become a mess when stressed the wrong direction. Keep it simple...

One thing that was pointed out to me in discussion with a yard fitter .... exhaust outlet best placed centre high up transom ... so that...

The two half hitches are made back on the dinghy painter to lock the clove hitch and secure the loose end - not the trot

3 trolley jacks ready ... 12 building blocks ready ... plenty wood ready ... Will jack up boat - 2 jacks at transom ... third jack at...

Depends on the rope in use ... some of the modern 'shiny' ropes today - when load comes off repeatedly - the bowline can become loose...

OUCH !! Sorry to read. Searching through mud for fittings ? I have dropped so much into my private channel and never been able to find...

I replaced the flat plate stemhead fitting on the Snapdragon I had years ago - with my own design. The Snapdragon design had the...

As I posted I am facing same question ... where to install. It may seem obvious but : Location needs to be so the exhaust is short and...

My Post was referring to items in post #4 .....

Mains input to that means you have live pins of a plug in hand !! The socket you show is designed to provide power OUT - not IN. It...

Autoterm .... Vevor .... various out there with good reviews ... I have a similarproblem as OP ... where do I mount the heater on my 38.

No good really ... the trailer is for less weight and also not very good in guiding boat onto rollers .. she is at this moment sitting...