Refueler's latest activity

It gets worse than that .... the stated distance has changed depending on what application. The Radar mile for years was based on 1800m...

No. The earth is an oblate spheroid ... best way to describe it as a pear shape ! That means 1 minute of arc on the surface of the...

That's fine until you start printing models as I do .... Model like this : I feel confident would not come out suitable for flight...

Km .. Feet ... Metres .... etc all have one thing in common - they are fixed standards of measurement and do not change wherever...

WOW ! Seriously ... do not forget that the designer of the boat and its rig would have factored in all manner of scenarios .... as...

Bambu printers ..... I've noted that over on model and 3D forums - the number of posts about them is increasing ... unfortunately most...

Check out 2nd Hand sails ?

Sorry but why the hassle ? Over counter can be bought Chopped Strand Filler that is perfect for this job ...

I am simply amazed at some replies ...... how such summation can be made and then proposed solution. Personally ? Get the sail to a...

No complaint here ... its just that often the resurrection post seems to imply poster has not realised the age of the thread .. I agree...

If not mistaken .. damage is on the luff where it slides in the furler .... I would be looking at the furler as well .. see if any rough...

Elevation ..... how high is your house compared to a boats mast ? We use AIS to track our vessels not only for voyage but also when...

For a range of wall mounted and various lights - the Caravan Dealers usually have a wider range than Yacht Chandlers .... and most are...

The suggestions to cut up strand / matt ... nice - but what a mess to clear up after ... and the possible health issues of fibres ...

What you need is Chopped Strand Filler such as Devcon or similar ... if you can get to the underneath - I suspect you can from your...