ProDave's latest activity

  • ProDave
    ProDave reacted to Misterbreeze's post in the thread Caption this please with Like Like.
    Left the steaming light on again
  • ProDave
    ProDave replied to the thread Sad..
    Any more news? Very high tide due to storm surge today, higher than prediction, I bet it has had another pounding?
  • ProDave
    Who has seen the highest tide today? Here is my entry: I wasn't actually there, someone else took the picture, but I swear the...
    • 1712500763467.png
  • ProDave
    ProDave reacted to dunedin's post in the thread Navionics updates with Like Like.
    I see that Peel Ports have now issued a Notice to Mariners 32/24 - can't immediately find an online link but photo hopefully attached
  • ProDave
    ProDave reacted to Tranona's post in the thread A fall in boat prices on horizon? with Like Like.
    There is nothing new about this cost of living cycle as those of us who went through the 1970s and early 80s remember well. Exactly the...
  • ProDave
    My first boat had a lifting keel, and that retracted fully inside the hull. So to dry out you were settling a bare hull on the ground...
  • ProDave
    ProDave replied to the thread Soldering a pl259.
    I changed the SOCKETs on my ham radio gear from SO239 to N so I can use good quality plugs. I would do the same on the VHF but it would...
  • ProDave
    ProDave replied to the thread Losing achor overnight.
    Do many routinely fit a swivel to their anchor? Ours does not have one and if you only anchor overnight I guess you don't need one...
  • ProDave
    Think about how you are going to maintain the boat. I don't mean fix things that break, I mean normal maintenance. Specifically I am...
  • ProDave
    ProDave replied to the thread Soldering a pl259.
    A BNC is a FAR better designed and engineered connector, and so so much easier to fit to the cable. And of course you need the BNC to...
  • ProDave
    ProDave replied to the thread Easytide?.
    Reset the browser page. If it had previously been on the broken version, a full reset is needed to make it work now.
  • ProDave
    ProDave replied to the thread Easytide?.
    Well and truly completely broken now.
  • ProDave
    At your "up to £3k" budget an inboard diesel is going to be your issue. If you get one that works it is likely to be old and...
  • ProDave
    ProDave replied to the thread Easytide?.
    Just tried it, and you are right. Is this because my IP says I am in Scotland so that is all it will allow me to access or do others in...
Top