PCUK's latest activity

CT1

I drill 304 and 316 stainless on a day to day basis and have never annealed any and it is usually polished anyway. Constantly...

You may be surprised but these are brilliant! £7.99 for a set of fifteen. Needed to drill some 2mm stainless. Started with a 3mm pilot...

I think this is one of most satisfying jobs to do, albeit very time consuming and sometimes fiddly. I imagine you agree or you wouldn't...

It's still expensive for what it is.

Thanks H, I knew it was a familiar name.

Or you can use gel coat and cover it with resin proof tape until it has cured.

Alicatt, have a look at the old school faux teak that I believe is now supplied by TEK-DEK. It is installed in place on the boat and...

15k for a Princess 32 is way over the top even for a good one. I think you need to look around a lot more before committing.

I'm OK with mud having spent many happy years at Gillingham marina on the Medway and later at Watchet as it gradually dried out. My...

I believe Bouba meant it's a project, Not a Project 31. I'm a great believer in projects, all my boats have been projects. But I could...

The price will probably exceed the value of the boat so if the verdict is bad then it's a no.

So apart from the tidal problems would you say it is a nice place to be based?

Definitely a first world problem you lucky chap! Best of luck however you do it.

I'm not guessing, a 6mm steel bracket with a knee, coated with epoxy will do the job regardless of the boat type.