PaulRainbow's latest activity

No tees that i've seen. Each VE-can device has two ports and they daisy chain together, the device at each end then has a terminator...

I would assume that to do it correctly you'd want some kind of a T connector just like any other CAN, although good luck finding one...

Victron docs can be a minefield. There is much said about VE-Can and terminators, so one would assume they are always needed, but they...

In post #11 you said it was a fixed length. Historically, it's not fixed, as your quote above demonstrates. It only became a standard...

No, just plugged into a Can port. The Can to N2K cable is treated as a spur/drop cable.

That's incorrect. A minute of lattitude is not constant, so a Nm based on that is also not constant. However, from Wikepedia : A...

I have two Garmin plotters on the flybridge, a GPSMAP1223 and a GPSMAP923. The 12" is primarily navigation, radar etc and the 9" is...

That's a mirror of my Garmin GPSMAP 923, on a tablet. Should work on any GPSMAP and something similar should be available on Raymarine...

Yes, Garmin does, but i'd need the switch. CAN isn't a faff, just connect a tenners worth of cable. My GPSMAP 1223 has two Ethernet...

Costs about a tenner to make the cable. Plug it in and it just works. Just need to create a page on the plotter. Here's one of mine.

In the settings of the Victron Connect App.

You need to reconsider how you do things. A power station doesn't make much sense, a LifeP04 battery should do what you want, for much...

Doesn't sound like anything there should cause the regulator to fail.

Paul, Confusion between Electrician and Magician:LOL: Easily done;) Trouble is we are not psychico_O

65 posts already and not even started.............