pandos's latest activity

I'd be looking at a way to make oil changes easier such as a pump fitted permanently to the engine like Some Beta engines have. It takes...

Indeed. Volvo here quoted £ 1.780 for a coolant and oil heat exchanger service (cleaning) on a 200 hp TAMD-series green lump. This...

Don't want to get into an argument but as a point of information, the correct name is Ireland, or in the Irish language "Eire".

I think if you come from NI you have no issues coming into Ireland, so maybe that is a way to do it.

No matter how well it is cut, unless you use the piece you cut out as the hatch you will see it as looking off due to the veneer and...

Another way to do the job is to cut the hole the size you need using a fine down stroke jig saw glue strips under the hole edges to...

I did that a few years ago...when I got home I had a call from a cardiologist to say I needed a triple bypass (CT done a few days...

As I understand it a canary would become more silent in CO so probably not really useful...

My thought was that the pump could be causing a back pressure which is distorting the valve.. I have a similar problem in my new to me...

Any chance your pump springs back or the electronics reverse it momentarily as it switches off.. Does it draw in the flushing water via...

My friend had similar with his Benco..charcoal is far more deadly than diesel...these days cheap but noisy Co monitors are available...

A friend of mine had a benco on a boat in Lake Geneva. It kept the boat warm and comfortable in minus 10c. I used to bring out turf to...

I write a little for PBO and not really for the little dosh I get (the day job is sadly not boaty), more to make me write up the...

I have used y10 that was years old it was fine... It wont work if the air temperature is too low, and it is slow to work even in cool...

Absolutely..