Hi
Anyone any good with these things
Have 2 x MFD - GS95 #& 125
Connect RMK10 to either and power up, system maintenance external keypad pair ..boom both work fine and keypad lit.,
Power down go home..come back 24 hour later and power up MFDS - only one connected to keypad and only the power...
Thanks for taking time to reply. I will try and get acrylic one made - simple design and shouldn't need all the ally framework these days .. cracking little boat
Have literally just towed into my drive a Ski Eleven! Anyone have any idea who / where to get the windshield from - or any ideas to retro produce / fit?
Many thanks
I agree that the rj45 adapters do not fit easily - its a ridiculously tight fit - i have used existing cabling between 2 working C120Ws and changed the MFDs for GS125s and it will not work - I have green lights both ends of the data cable if / when I insert switch and 1 thru 8 on a Cat5 tester...
Morning
HAs anyone ever automated their bimini with linear actuators or would know how to or someone that would know how to ? - guessing with some technical knowledge it wouldnt be beyond the realms of man - my bimini is heavy and awkward to put up so was looking for an automated alternative
TIA
Apologies for confusion - im not sure how you see one cooler at 13 degrees C on startup and one at 53 degrees C as 'pretty normal' - surely the oil cant be 53 degrees C on startup - they will then increase to 55-60 port and 75-80 s/b under load - my guess is Mr Googler is right and most likely...
Old thread I know but my Vesselview is showing 'Gear Temp' variations - on start up port = 18 (seems normal) and s/b 55 (abnormal)
I posted on Sbmar and opinion seems to be fault with Smartcraft - I am not even sure what Gear Temp is as on my QSB 5.9s Cummins I dont think there are sensors on...
Perfect yes was going to upgrade to Quantum wifi / wired
but no obvious reason then to buy i70s - either axiom 7 to replace both ST60s with ITC-5 or keep ST60s
Apologies if been covered.
I have 2012 tech Raymarine. So C120W chartplotter and 2 x ST60s. I also have mercury smart craft vessel view
I am looking to upgrade.
Is there a reason to change to 2 x i70s over and above getting an Axiom 7inch MFD to replace both and having split screen showing...
Did it - mapsource - all update to latest software from 2010 - its only for a tender for speed / depth readings - not main Nav system!!
Used a RS232 adapeter to USB off amazon - pence and downloaded latest garmin basecamp, then mapsource -
Garmin: BaseCamp Updates & Downloads
Garmin: MapSource...