noelex's latest activity

I made my own by sketching out what I needed and then taking it to an custom engraver and getting then to make what I sketched

Here is another example from a different boat, to give you some installation ideas.

As Roger has indicated, the DIN rail circuit breakers are a good option. They are very easily replaceable (important if you are using...

JBC make excellent soldering irons, but they are expensive.

Most lead acid house batteries on boats do not die a natural death, they are murdered :).

The default password was previously always 000000 (six zeros), but lately I believe they have used individual random numbers on some...

That will work fine (y) .

As others have said, you should be fine with the 100/20. Make sure you provide plenty of ventilation, as this controller runs relatively...

The issue is ensuring the circuit has sufficiently high interrupt current (IC) protection. If the fuse has a lower IC than the battery...

I have both. There are good reasons. Standard winches are faster to tack or jibe. No stripper in the way when spinning turns on or off...

Blue Seas make several battery switches with a higher rating: The m-series has a 300 Amp continuous rating. The e-series has a 350 Amp...

They look like cheap, thin walled, non tin plated terminals. They will only accept small wire gauges despite the pictures. The low...

We have sailed through a couple of UK winters in the Hebrides living on the boat full time at anchor. Beautiful scenery and wildlife. If...