MontyMariner's latest activity

A hard eye in the centre and each end would imply the use of shackles. Plastic things to stop shackles and eyes banging the deck or...

Yes you can! Splay it open wide enough to include two reinforcing plates and use a shanked bolt and locking nut in place of the clevis pin.

Just noticed that the thread is 2010 🤭

I don't know the style of the fitting and it's not clear from the picture, is it a single fin or a two fin fitting with the forestay...

It's behind the prop. Prop off, shear pin out, remove two bolts, prize off cover, note the way the impeller blades are bent, remove...

I have them Downloads : Monty Mariner

Snap

I used Delrin rod for my replacement sheet blocks. Delrin Rod | Direct Plastics Limited

For mooring buoys and wall rings I have made up a couple of rope bridles with a meter of 6mm stainless chain spliced into the middle...

Just floating around the English coast, I don't forget, a lot of the time I just can't be bothered! Going X Channel it flies from the...

It depends on what you are using. With a Whisker Pole I find it only needs a downhaul. I don't use a Spinnaker Pole on the Genoa, it's...

Robust Kevlar® fabrics by the metre Damn, they don't do Red, but you could have a nice Blue one 😁

I agreed with Tranona, Poole yards are easier to access by boat.

Depending on what you draw Ridge Wharf Yacht Centre & Boat Yard. Boat Yards Poole Harbour I think 2 mtrs is possible on a spring.

I'm PEE !