Ian_Edwards's latest activity

I don't know no if this of any use? Pardon our interruption... SAE 20, it says for use in clasic gearboxes. Mineral oil, low detergent...

Very sad to hear! I’ve had lots of bits and pieces from Seascew over the years. A great range of products all in one place!

Can I post or send by courier a self inflating jacket? Reading the rules it seems that gas cylinders are prohibited, but have bought...

Trying to get back to the original question, perhaps. First up, why I think I'm at partly qualified to venture a view on the question...

Lots of derogatory answers so far, but noone has come up with any form of explanation as to WHY the wire itself should be degraded. And...

Assuming the hull is securely supported, and the end of the keel is on the ground. Then you need to suppprt the forward end of keel...

I have a Victron MPPT control charging the LiFePO4 battery bank. It does what it say on the tin, but it has quite a high quiescent...

I used OB1 to do the same job and can affirm its stuck on solid. Used a toothed spreader.

Pretty sure that will work. My go to for that would be Sika 291, but there are lots that would do the job.

These guys say yes because of contamination from fuel and condensation, even at low hours. Similar question from 2011. Why won't oil...

I've tried a standard furling system, a sock, and a top down furler. From experience a top down furler is the way to go. With the...

Trudesign is the go-to these days for most folk. No corrosion, not even on the ball, no dezincification, no condensation inside, no...

Yes a Typo, a trade mark of mine, I think. From my limited experience, CT1 and it's close relative OB1 are better in the damp...

To bump this up. I took a look at the 27.1, and from the photos I could see, the chain plates seem to be a deck mounted SS plate with...

I'd be interested, my boat is out of the water at Clyde Marina, Ardrossan, which isn't too far from Cumbernauld. It's already on a half...