Graham376's latest activity

Certainly looks like they are trying to charge double VAT, unless they are charging local VAT and UK VAT - which they should not do if...

I'd replace your outboard mechanic.

Also spotted off Galicia - MSN

It appears to be a BMC 2.5. Thornycroft - Thornycroft T-154 (BMC 2.5) 62hp Marine Diesel Engine (Pair Available) For Sale in Dorchester...

A lot also depends on if you're mainly stopping for a bit of lunch or might be out there for many nights wanting to sleep & with the...

Sounds as though the carb needs cleaning. .

Sometimes, my short shore lead is too short and the long one is too long and needs coiling to keep it tidy. There's a big difference in...

Sailmakers are normally very busy at this time of year and that may well be "I really don't want the job" price. Any tarpaulin makers...

Tried heating the housing with lots of boiling water ? Maybe the only way will be to cut off the lever and drill out the plastic shaft...

I have wondered what would happen if a wing keeled boat dried out on it's side. With the increased heel, would appear it's more likely...

We only draw 1.5 and don't remember having any worries about depth but it was quite a few years ago last time there. A bit further...

Lots info & reviews on Track your boat and share information on places to visit Imho round St Vincent is a much nicer area to spend the...

I had a year contract at Leixoes marina, it's basic and it can get bouncy in there depending where exactly your boat is but it's cheap...

Mine is on the bottom of the hull maybe about a foot from the tail end of the gearbox and just to the side of where the prop shaft...

We have a hull anode connected to the engine and shaft via bridge wire plus the P bracket and rudder bottom bearing, it lasts a couple...