DavidJ's latest activity

Thanks I’ll PM

Thanks Ah yes I’ve made a note of your bush and for others it’s on #138 I’m sure there are dozens of free design sites but a friend...

Have a look at post #69 - I made some plastic parts that hold silica beads and fit into the AMS - might help. I keep my printer in my...

Ah! I missed #69 or maybe didn’t understand it at the time. Was that something from the Bambu “library” or home made?

Note that there are no standard pinion types so be thankful that the one he fitted is near enough that it works.

Thanks for the update That clip is amazing, did you make it solid for strength? My plan to keep the Bambu upstairs has been scuttled...

Glad your problem is solved Seems though that you didn’t try the starter with the mystery wire not connected so we still don’t know if...

Yes agreed, I have worked on this design also. It's difficult to get a clear (to me) description of the fault so trying to keep...

Your description is correct for the starter motor that you show but some motors have a two stage solenoid when you get tooth to tooth...

The drive pinion should be engaged befor the contact disk makes.

I thought your starter was the pre engaged type ....if so it's possible that the solenoid was not an original direct replacement because...

Yes it would be useful to get a better description of worn movement. The operation is very simple so if it works on his test equipment...

Maybe, but that would be an extremely silly design since the relay is a ‘rescue’ device if the starboard engine battery is flat.

There is no way to change the movement. Some motors will have an eccentric screw adjustment but this is only to adjust the clearance...

My guess Link switch relay