Daverw's latest activity

Paul, that’s great info, assume you mean 50mm to each battery? Just another question, what do you use for battery isolation, the ones I...

I’ve 2 off Victron 12.8v 200ah Smart Lithium, data sheet lists 400amp max, less than 200amp recommended. They have an external BMS...

I’m fitting 2x200ah batteries, about 1500mm from buss bars, existing wiring to AGMs is 25mm, looking at 35mm cable to new with 150A T...

That’s what I thought but not sure why Victron show as they do

I’m just about to do the final bit of fitting the batteries, all else upgraded over the last two years, using the Chinese crimpers has...

Same with my one

I did mine last year with pipe bender, the issue was the formers were not quite the exact fit of the od of the tube as they are designed...

So just think how your engine must feel. Have some sympathy. As Bouba says. The best way to waste money-- is not to spend it.

1. Buy an electric screwdriver 2. Put your ratchet screwdriver in it 3. Whizz it around for 10 mins till dry.

Will let you off 😀😀

I wish you had posted this 7 days ago, I’ve just had delivered the cable to do the same to display power stuff on B&G plotter, 🥲 o well...

Most find that Navionics give us most of what need to supplement paper or chartplotter, many just use the app and find it just works...

Even I use a stack pack when cruising.... I had one made that sits on top of the boom with velcro straps around the boom. This means I...

Get a stack pack. You'll wonder why you didn't do it sooner.

I have a HF and Vhf ham set on board to play with when I feel the need, as Ive a full ham licence this is not an issue, my HF set is...