Alex_Blackwood's latest activity

Yes, if you wire them in parallel.

Yes.

If I am confusing the issue, apologies! Looking at the ac IN it would appear that, if this is your shore supply it is a tad low (In the...

Thanks everyone! Sounds like I should buy the ones with the adhesive pad, then remove the pad and use epoxy.

Just wait until you are involved in an "Incident" and the MAIB start checking. 😵‍💫 Just like many things you are OK until you get...

Practice, practice, practice. As others have said, it's easy.

Its really not difficult and almost fool proof. You unscrew the locking ring of the transducer, the transducer will commonly stay 'in...

As the OP said "not brave enough to do it while afloat" 😵‍💫

Just make sure the clamp meter you order does DC current as well as AC. It’s often not immediately obvious.

Got this done last weekend and working fine. The only small issue we had was with the battery charger which came on whenever the...

hi, When engine is running it will run forever. Itstops and leds are flashing pointing to low voltage

You could usefully monitor the actual volts and current over time. There could be a fault with the fridge. Are you sure you are actually...

Is the OP sure that it is cutting out on low voltage? Could it be that the compressor thermal trip is operating? Does the fridge restart...

Galvanic corrosion never depends upon an external electricity supply. Electrolytic corrosion occurs when there is an external supply.

Just to make the thread educational would you mind saying how? It would be of interest to me and maybe others in case a similar issue...