Tranona

That is not much capacity - maybe enough for one and bit nights' usage before going below 50%. Double that for a fraction of the cost of...

Paint it to reduce the surface area. Add a hull anode.

Suspect this is as much to do with reducing expenditure on sponsorship as much as the reasons given. Ineos sponsorship for F1 has...

Important to leave a gap of a minimum of 15mm between the propeller boss and the stern tube to allow water to flow in and fill the stern...

There is probably not much you can do if it has been exposed to the elements for a long time. Treat yoursaelf to a new one and enjoy...

You still can clydemarineleather.co.uk/products/wheel-covers/ or seadogs.co.uk/product/leather-wheel-kits/

Yes - a bar or a screwdriver across the ears. Make sure you grease the threads when you put it back together.

Probably needs refreshing with either fine (400-600) wet and dry or a burnishing pad such as Scotch-Brite

The link directs you to Douglas Marine located on the Douglas river off the Ribble NOT the IOM. Alternative to going up to Preston

Try it with part rolled sail. The shape may be not very good but it might give you a guide. Masthead rigs like that usually have an...

I am just installing an 811S, bigger version of the 609. Of course not the same quality as a Selden at well over twice the price, but I...

The surveyor should provide you with a list of what he is going to cover and what his report should look like. The real value however...

The normal connection is to the gearbox/engine connection which usually gives a path to the shaft. However if you have a flexible...

You might get more response if you post this on the Motorboat forum

No It does nothing to the heat exchanger which may or may not have its own anode. The seawater in the heat exchanger is essentially...