yotter

Glad its all sorted now, but said the leak was between the fuel return line and the top of the engine fuel filter. I think that the...

I got the whole kit, so did it all...or did I, might of just been the diaphragm, will have a think. There are U tube videos of course

I did one last week, a PITA, but it sealed first time so happy:-)

I would be worried about high voltages upsetting the boats electronics and possibly causing damage. I have seen 16V from a defective...

I fitted one of these (40mm pole I think), it is well designed and constructed, I did add extra fittings to make the lower fixing point...

We have a 34 foot boat at 6 tons, VP2030 (29HP) and cruise at 2500 rpm, 2 litres an hour. It will be more in a seaway or headwind. We...

A second hand saildrive may be an option? volvo penta 110S saildrive Sail Drive | eBay Ops already posted by Tranona:-)

I have a VP2030D with a SD130 from 2005 which is 2.47:1. I agree the wire should be investigated, hopefully not connected to the engine...

It that not a 130S. I see a wire attached to one on the bolts on the SD gearbox, do you intend to attach an anode to this or the...

We We only use perhaps 2 x 4.5kg a year, wish it was more, since that would mean more sailing. When I hopefully get more time for...

Kip have them in stock (£26 I think), so just swapped back from Flogas to Calor. Looks like Calor is going to be more available than...

I have agree. Is it not possible that the failure was at the lower rudder bearing, and the increased mobility of the stock caused...

A tube does not have a higher bending strength than a solid cylinder of the same diameter. The strength of each depends on the second...

That's my perception (looks to be wrong), I am probably crazy as you say! Perhaps its weight for weight for weight. We need Viv Cox to...

I hate to create drift, but I recall rudder failure during the the 1979 Fasnet with OOD34 carbon fibre rudder stocks,. Standing by to...