DavidJ

Interesting With my Bambu I’m getting 1% shrinkage which I hadn’t expected given that the filament feeder identifies the label on the...

Interesting that the slider is not full length, implying that the slider comes to a stop and the part with the ‘cut out’ protrudes, but...

Hmmm It’s something (probably two) that slides to make something detachable. It’s going to be something quite lightweight but what? Am I...

Leave closed and cap the open end.

Let’s replace it by “Holistic approach to agile, cutting edge, solution based leveraged staff expertise”

I hadn’t thought of that! We used to get a lot of weed and bringing the anchor up and down from the bow control at water level never...

I’m interested in the source of this information Assuming you have KAD43’s or similar WOT is about 3800rpm, well above the supercharger...

That’s really good Just thinking a really low tech chain counter would be a camera so you could watch the inserts go by.

evening all, fwiw, I designed some for a 10mm ISO (may fit on the other DIN but haven't got one to test) Test fitted them they look...

I think this describes it well but Gibraltar is going through all sorts of stuff at the moments so not conclusive in my view but replace...

Ah! You have to look at the positives. For example, we now have the freedom to have bottles with detachable tops, unlike the EU who now...

:ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO::R...

Just thinking The guy in Scotland I mentioned does repairs. Why not post it up to him. He has decent test and calibration equipment

The S37 was a bit light on the anchor. I notice on the later S38 they went the next size up. Of course with the Sealine “nose” you can’t...

Thanks David, I did find him on the net but just the motor and gearbox is nearly twice the price of a new Lofrans X1 and it would leave...