Martin_J

I also have a friend who asked the same question to me when they were looking at a modern Beneteau Oceanis 40.1 (that was the shoal...

I totally agree with all that Johnalison has said above. I have the shoal keel Moody S38 (1.5m draft instead of the 1.8m draft). I...

Once connected, you should be able to confirm the TP32 is on the NMEA2000 network by listing the network devices, in a menu, on...

Thanks for the replies. I don’t have any of the Simnet adaptors or m-f converters - but I do have several cut off ends of NMEA drop...

The Simnet to NMEA2000 kits look expensive for what they are... But if you have the NMEA2000 parts already, and also have that Simnet...

That sounds like the easiest/quickest way to do it... The wire colours will be obvious. Not one of my photos, but a clear exasperated...

I like the way Moody do it... A stainless strut permanently attached to the underside of the locker lid and clipped in place as well...

How about a side entry clam cleat.. Clamcleat Side Entry Cleats - Force 4 Chandlery

Heard the news on Facebook... Imray and Freytag & Berndt in partnership... And now heard at the Cruising Association... Cruising...

Doesn't Hyphose, in Farlington, just behind the big Sainsburys do this type of repair...

I would have thought unlikely to be able to compress by leaning on it (especially my light weight). There's usually the weight of the...

Hi, I finished up using some mylar sheet, from an old ring binder, where it had been used as a separator. It sort of worked, I applied...

And as PaulRainbow says, gelcoat needs covering anyway...

I tend to keep some bits of flat plastic sheet from the front of food packaging handy for covering small repairs. If just slightly...

I would go with Ammonite's suggestion of an Abracs poly wheel (from Toolstation!). It will easily remove stuff like antifouling, it...