Little Dorrit
Well-known member
Used Danfoss BD35 air cooled compressor complete with virtually new Frigoboat, 130F bendable evaporator (24.75"w x 8.25"h Bendable Flat Plate) and custom made bracket for siting unit on bulkhead. Can be shown working - £350 ono.
.
Additional pictures can be provided on request.
The Compressor and Evaporator are pre-charged with r134a and have Frigoboat couplings for easy installation and removal.
The system has been fully checked by professional marine refrigeration engineers (Penguin Refrigeration) who have carried out a full service including vacuum pump, pressure test and r134a charge.
The unit is in very good condition, the evaporator plate is hardly used and alone retails for £200. The compressor and condensing fins are in very good condition.
I am including a custom made bracket for siting the unit on a bulkhead but you may need a base plate made of ply or metal which will be easy and straightforward. I am including an electronic thermostat (a mechanical Frigoboat one is about £25).
Please note that the Frigoboat couplings, condenser, and evaporator are of superior quality to other systems which is reflected in the retail price of these units compared to budget systems; this Frigoboat system would retail at over £700 depending on the condenser. The large L plate capable of chilling up to 160 Litres) retails at £200.
The cheaper units have aluminium pipes or different evaporators and condenser.
I am asking for £350 ono. Collection only from Portsmouth.
Additional pictures can be provided on request.
The Compressor and Evaporator are pre-charged with r134a and have Frigoboat couplings for easy installation and removal.
The system has been fully checked by professional marine refrigeration engineers (Penguin Refrigeration) who have carried out a full service including vacuum pump, pressure test and r134a charge.
The unit is in very good condition, the evaporator plate is hardly used and alone retails for £200. The compressor and condensing fins are in very good condition.
I am including a custom made bracket for siting the unit on a bulkhead but you may need a base plate made of ply or metal which will be easy and straightforward. I am including an electronic thermostat (a mechanical Frigoboat one is about £25).
Please note that the Frigoboat couplings, condenser, and evaporator are of superior quality to other systems which is reflected in the retail price of these units compared to budget systems; this Frigoboat system would retail at over £700 depending on the condenser. The large L plate capable of chilling up to 160 Litres) retails at £200.
The cheaper units have aluminium pipes or different evaporators and condenser.
I am asking for £350 ono. Collection only from Portsmouth.
Last edited: