V1701

With the wind in the north and at that time I think you'll be fine. Been quite squally lately but forecast looks fair...

ACF50 is about the best penetrant I've come across, I'd apply that, leave for 24hrs, then apply heat to body as already suggested. Those...

Soz should have said probably ok if hooked up to vacuum and sanding by hand should be wet. I wonder if there are any places where they'd...

You can have a go of Navionics via the Web here. It's not hard to use...

I replaced my Jabsco with a Seafo 41 series 25psi, the Seaflo is quieter, I did have to adjust the flow sensor after it nearly cooked...

Lots of us just use Navionics on a tablet. Annual subscription to area(s) of interest - UK, Ireland, Holland £40. Download to use...

You could maybe use the likes of a bahco scraper (the one with the ball on works best), with the very ends of the blade filed down to...

Not at the moment - see this thread in the Bristol Channel Forum...

Very similar story, happened to me in thailand crewing on a big old wooden Indonesian boat equipped for diving. Two of us divers...

Hi. Pretty good. I have 50 ah and 100 ah battery. Occasionally I take my son fishing in the Skipper on the Blackwater. I do have a 3.5HP...

We've used Leixoes a couple of times and would again. Would not leave a boat in the Douro marina or use in bad weather as it's very...

I had a year contract at Leixoes marina, it's basic and it can get bouncy in there depending where exactly your boat is but it's cheap...

Just back from delivering a Bestevaer 62 to Trondheim in Norway. There aren't many yachts I'd be happy to sail that far north in April...

Bump. You can find RYA or MCA bill of sale forms online but no idea what's required in Italy. In UK there's no requirement to involve...

Most of mine start like that but as you say, a good powerwash makes a world of difference, sometimes needing a powerwash inside too 😬