P
Reaction score
480

Latest activity Postings About

    • P
      PetiteFleur replied to the thread Lavac suction problem.
      This is what happened to me last Monday after I had also replaced all hoses and refurbished the pump. I had to fill the bowl with water...
    • P
      I use International Compass polyurethane varnish. Used on my washboards and handrails, but I fit canvas covers over them to protect them...
    • P
      PetiteFleur replied to the thread Chain Plate.
      They may be just screwed into the grp or maybe there is wood behind it. As suggested, try to unscrew it... If they screwed into grp...
    • P
      PetiteFleur replied to the thread Honda BF 2.3D.
      I had this problem with my 2.3 a couple of years ago, stripped & cleaned a couple of times, then managed to drop the carb and break the...
    • P
      PetiteFleur replied to the thread Old Sails and SS Rigging.
      You should be able to sell them on ebay. Must have an accurate description, lots of photos and luff, leech & foot dimensions. I've sold...
    • P
      The Marlow Polypropylene I use is excellent and does not degrade noticeably in the UK East Coast. Unlike the common sof blue type &...
    • P
      That is why I always use a floating rope on my dinghy - 1/2" Marlow polypropylene rope. Just fitted a new length this year.
    • P
      PetiteFleur replied to the thread VHF Connection confusion.
      I also had those deck glands on my current boat and it was a PITA - so did as Boathook says, used an Index Marine Deck gland and made...
    • P
      When I bought my boat about 18yrs ago, it was ashore and I had the mast lowered to repair damage to the crosstrees which the local...
    • P
      Looks like they are steel screws- probably BZP, (Bright Zinc Plated)which will always rust, particularly in a marine environment. I...
    • P
      Y10 should work, I've used it for rust stains and it works well. Even when a friend left his Jerry can on deck for a while, leaving...
    • P
      PetiteFleur replied to the thread Beta 20 water leak.
      I can't remember about how it's fixed but I replaced bearings and seals when my Beta 25hp started leaking But make sure you get oil...
    • P
      Just keep it going until it finally gives up...What make and model is it? Beta Marine is a good replacement, reasonably price, excellent...
    • P
      PetiteFleur replied to the thread Scapa Tape - Window Sealing.
      I've used Butyl tape to seal the window frame to the coach roof but with a stainless washer at each screw hole so the tape is not...
    • P
      PetiteFleur replied to the thread Gas regulator.
      My experience - I bought a WHaward marine regulator from a supplier and it apparently failed after a few months, replaced initially with...
  • Loading…
  • Loading…
Top