Yeoman and Navman

[johnphilip]

I still like to use my Yeoman Plotter with its paper charts as it is much easier to see ahead or plan ahead than on the small screen of the Navman Plotter. What I want to do is to upload waypoints made on the Yeoman into the Plotter. Before we had the Navman we could do this with an old Garmin GPS 75. The waypoints could only be given numeric names from the yeoman, but at least it worked. With the Navman I cannot see how to do it. Any Suggestions please?

 

[Gin]

I have a Yeoman Sport Plotter and what you want to do cannot be done unfortunately as I had a conversation with the manufacturers on a similar point

Edit: - unless the fixed plotter is set up differently of course

 

[earlybird]

[ QUOTE ]
I have a Yeoman Sport Plotter and what you want to do cannot be done unfortunately as I had a conversation with the manufacturers on a similar point.
Edit: - unless the fixed plotter is set up differently of course

[/ QUOTE ]
Are you referring to a particular plotter? In general, I would have thought any plotter capable of receiving the NMEA WPL sentence output from the Yeoman could do what the OP required. AFAIK, many plotters can do this but I don't know specifically about the Navman. This info should be in the handbook however.