GaryE
Active Member
Engine is in bits 'cos piston rings were a tad worn. Other than that, in really good shape.
However, when cleaning up the head this weekend, found the casting is really thin around the exhaust port, so thin, there is a hole through to the pushrod tunnel!
So if you have a spare head kicking about, or know someone that has, please get in touch.
Ta Muchly,
Gary
However, when cleaning up the head this weekend, found the casting is really thin around the exhaust port, so thin, there is a hole through to the pushrod tunnel!
So if you have a spare head kicking about, or know someone that has, please get in touch.
Ta Muchly,
Gary