Windlass and Roller reefing boom end

Clyde_Wanderer

New member
Joined
15 Jun 2006
Messages
2,829
Location
Glasgow
Visit site
Manual windlass,Simpson Lawrence high speed 510.
In good working condition but could do with repaint.
8mm Gipsy, and rope drum.
Collect in Glasgow area only, wont post.
Currently fitted on Nicholson32.
I have since been adviced that this winch would have a value of aprox £60.

Roller boom end mechanism for roller main sail reefing, in perfect working condition.
Reasonable offers.

See pics for both items below.
I am advertising on behalf of a friend.

P1030563.jpg

P1030562.jpg


P1030564.jpg

P1030565.jpg
 
Last edited:

ropeworkuk

New member
Joined
10 Sep 2010
Messages
34
Location
S.Wales
Visit site
boom end

Hi,

Please could you tell me the diameter of the boom that the roller reefing boom end is connected to?
I can then see if it would fit my boom

Best regards
Justin
 

Clyde_Wanderer

New member
Joined
15 Jun 2006
Messages
2,829
Location
Glasgow
Visit site
Hi RWUK I am hoping to be down at that yard before if not at the wk end, will measure it and let you know.
I would suspect it is aprox 4-4.5inch dia as it is off a Nicholson 32, but will confirm.
Thanks, C_W
 

Hyskeir

New member
Joined
10 Jun 2010
Messages
3
Visit site
Nic 32 boom fittings

Good afternoon, a quick question on the boom, your picture shows the mast end fitting, does your friend have the fitting for the other end, if so is it in reasonable condition and without too much wear to the uphaul and mainsheet attachments.
Thanks is anticipation.
 

NorthUp

Active member
Joined
1 Sep 2008
Messages
1,491
Visit site
Hi CW,
I am interested in the windlass, price sounds good.
Where in the Clyde are you?

edit-
just realised the date, , might be a bit late now!
 
Last edited:
Top