Water coming through saloon roof from fly bridge !! Yikes

[Lisa&Paul]

After attempting to unblock fly bridge drain I removed the s/steel cover to reveal a 90% bend pipe about 2 inch down and across with nothing attached to take water lower to exit valve just above water line , there is mucky water trapped in the space between fly bridge floor and saloon ceiling , this can’t be right , feel I have knocked a connecting pipe off with my flexi wire prodding , if so any thought on a miracle cure /repair pleeez ?

 

[Portofino]

Re fit the pipe with a touch of adhesive or tie wrap or both .
Never poke anything down again .
Suck / hoover it out only .

 

[[2068]]

You are probably going to have to remove a saloon ceiling panel to fix that one.

 

[Lisa&Paul]

Re fit the pipe with a touch of adhesive or tie wrap or both .
Never poke anything down again .
Suck / hoover it out only .

Yes lesson learnt , will need surgeons skills and tools to try to relocate the pipe and reattach in what is a small space with big hands , 1st need to remove / suck out water lying casual so I can try to locate detached pipe ..... I do like a challenge !!