WANTED Main Sail & Roller Reefing Genoa For A Pandora Mark 1

Pandoramark1

New member
Joined
8 Feb 2011
Messages
60
Location
West Wales
Visit site
Hi All,

I am looking for both a Main Sail & Roller Reefing Genoa for my Pandora Mark 1 - either new or second-hand. Will consider any sail condition and distance (within Reason) if you have one or both or think you can help please contact me on pandoramark1@gmail.com

Need them ASAP as the boat is going into the water in April, and must confess am getting a bit twitchy :)

Thank you
PMK1
 

sailduck

New member
Joined
5 Jan 2008
Messages
55
Visit site
I'm not familiar with a Pandora - what is the luff length for your headsail?

I have a furling/reefing system that might do - luff is approx 7.3m - but can obviously be cut smaller

Also a Kemp cruising headsail tha fits the furler
 
Last edited:

Pandoramark1

New member
Joined
8 Feb 2011
Messages
60
Location
West Wales
Visit site
Evening sailduck,

This is indeed good news!! the luff is about 7.0 meters 23feet so sound like a good match. If you would not mind could you PM me with the price for each individually and the price for them both together.

I have reefing gear (a 608-S) but it is in a bad way so would be interested.

Look forward to hearing from you

Kind Regards
PMK1
 

sailduck

New member
Joined
5 Jan 2008
Messages
55
Visit site
exact measurements

Furler/reefing gear
has twin grooves. comes in 4 x 1.5m sections, 1 x 1m section, 1 x 30cm section plus the bottom drum (32 cm)
total 7.62m. obviously you can remove any of the sections or cut one down to the exact size you want.

Sail. 7.0m luff, 6.5m leech, 3.7m foot. Just checked it and it's in better condition than I remembered.
 
Top