Chrissie
Well-Known Member
Help please, friend of mine with a Bav. 34 needs advice on his Propellor, how does the end cone come off, screw? tap? twist? or plain brute force?
Volvo Penta MD20/20 saildrive ,how to remove prop?
- Thread starter Chrissie
- Start date
Tranona
Well-Known Member
Re: Volvo Penta MD20/20 saildrive
See post below for info on both standard and folding props.
See post below for info on both standard and folding props.
Chrissie
Well-Known Member
Thank you, that was really good information, and saves him using brute force /forums/images/graemlins/laugh.gif
Chrissie
Well-Known Member
He hasnt managed to get the cone off yet, but also needs to know which anode he needs, I cant get through to EVolvo Penta, lunch break perhaps, does anyone know which anode for MD2020 year 2000 Transmission MS25s-A
Bav34
...
Volvo part number is 876286 but if he has an Ambassador stripper it will need to have been modified.
Motortech Marine Engineering Ltd
4-5, The Slipway, Port Solent, Portsmouth, Hampshire PO6 4TR
Tel: 023 9220 1171
stock them but I managed to get one from Gosport Boat Yard.
Motortech Marine Engineering Ltd
4-5, The Slipway, Port Solent, Portsmouth, Hampshire PO6 4TR
Tel: 023 9220 1171
stock them but I managed to get one from Gosport Boat Yard.
Bav34
...
...also, the cone really is easy. Remove the s/s bolt. Jam prop with a piece of wood..... put screwdriver through hole in cone and tap anti-clockwise until it frees.