David2452
Well-Known Member
EVC "B"
I have acquired a VP EVC display and need a bit of info to save me paying stupid Volvo price for an X5 multilink breakout lead and multilink to display lead, from the NMEA 2000 converter I already have installed I can see that there are 6 pinouts on the HCU using a Deutch connector, power and return are a given on pin 6 & 4. Pin 1 is yellow/green as is pin 2. Pin 3 is yellow/white as is pin 5. The display has a 12 port Deutch connector but I know only four of these have input from the breakout, pin 1 &2 being live and return. Pin 8 is yellow/white and pin 7 is yellow/green. My question is which of the yellow/green and which of the yellow/whites from the HCU should I use. I have all the connectors and cable to make a lead.
I have acquired a VP EVC display and need a bit of info to save me paying stupid Volvo price for an X5 multilink breakout lead and multilink to display lead, from the NMEA 2000 converter I already have installed I can see that there are 6 pinouts on the HCU using a Deutch connector, power and return are a given on pin 6 & 4. Pin 1 is yellow/green as is pin 2. Pin 3 is yellow/white as is pin 5. The display has a 12 port Deutch connector but I know only four of these have input from the breakout, pin 1 &2 being live and return. Pin 8 is yellow/white and pin 7 is yellow/green. My question is which of the yellow/green and which of the yellow/whites from the HCU should I use. I have all the connectors and cable to make a lead.