Volvo 110S sail drive water inlet thread

[PembrokeshirePromise]

Title says it all really - anyone happen to know what thread the fitting that screws into the saildrive leg for the water intake is.

And better still where I could get a blanking plug for it.

I'm guessing it might be 3/8" BSP - its about 16.5 mm outer diameter on what came out - but I'd like to know for sure before I order any more wrong sized bits !

Thanks

 

[scottie]

Sounds right

 

[PembrokeshirePromise]

Thanks - is that based on knowledge of the leg of teh fact that 16.5 mm sounds about right for 3/8 BSP ?

 

[VicS]

The OD of ³/₈" BSP is 0.656". I make that approx 16.7 mm. The pitch is 19tpi

 

[Davegriff]

Plug listed here (part 75)

http://www.marinepartseurope.com/en/volvo-penta-explodedview-7742100-44-13911.aspx

 

[PembrokeshirePromise]

Thanks - that's the part - unfortunately doesn't say what it thread it is.

Available for a very reasonable 3.34 Euros
Unfortunately carriage is either 18.75 or 75.00 euros - fed ex

Wonder if KeyPart can stick it in an envelope !