Twin wire battery cable securing clips / cable clamps ?

[Boo2]

Hi,

Anyone know where to buy cable clamps / securring clips that will mount 2 battery cables around 13mm diameter for running power to a windlass etc ? Cable is 50mm sq or, as stated ~13mm o/d.

All ideas gratefully received,

Boo2

 

[bigwow]

http://cpc.farnell.com/

 

[David2452]

Just use crimped tube lugs and round post to 8mm post adapters, unless the battery has 8mm posts already.
http://www.alltradedirect.co.uk/50mm-8mm-BATTERY-CABLE-COPPER-CRIMP-LUG-RING-STARTER-TERMINAL-TUBE-WELDING-x

http://www.ebay.co.uk/itm/Battery-Terminal-8mm-Post-Positive/220898732115?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222006%26algo%3DSIC.FITP%26ao%3D1%26asc%3D20140107083358%26meid%3D6041798124783067339%26pid%3D100011%26prg%3D20140107083358%26rk%3D4%26rkt%3D10%26sd%3D151243462661

 

[Boo2]

http://cpc.farnell.com/

Care to be more specific, Bigwow ? I am looking for cable clips that will secure two wires each ~14mm dia to a typical boaty style interior and would really prefer specific recommendations based on peoples actual experiences.

Thanks,

Boo2

 

[Boo2]

Just use crimped tube lugs and round post to 8mm post adapters, unless the battery has 8mm posts already.
http://www.alltradedirect.co.uk/50mm-8mm-BATTERY-CABLE-COPPER-CRIMP-LUG-RING-STARTER-TERMINAL-TUBE-WELDING-x

http://www.ebay.co.uk/itm/Battery-Terminal-8mm-Post-Positive/220898732115?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222006%26algo%3DSIC.FITP%26ao%3D1%26asc%3D20140107083358%26meid%3D6041798124783067339%26pid%3D100011%26prg%3D20140107083358%26rk%3D4%26rkt%3D10%26sd%3D151243462661

Thanks for the suggestion, David, but I already have the connection lugs and the battery terminals, what I am looking for is securing clips that will take two wires and attach them to the boat interior during the cable run.

Boo2

 

[David2452]

Care to be more specific, Bigwow ? I am looking for cable clips that will secure two wires each ~14mm dia to a typical boaty style interior and would really prefer specific recommendations based on peoples actual experiences.

Thanks,

Boo2

Ahhh, you want P clips http://www.ebay.co.uk/itm/like/260423542132?hlpht=true&ops=true&viphx=1&lpid=95&device=c&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0&ff12=67&ff13=80&ff14=95 This is what I use on a regular basis, strong and easy to use.

Also as you have 14mm cables you could use these, very tidy and cary two at once. http://www.screwfix.com/p/double-hinge-clip-15mm-pack-of-50/20167

 

[Hadenough]

http://www.plumbnation.co.uk/site/1...-clips--50-/?gclid=CPSuxYCQz70CFWjmwgodap4Abg

Cost effective solution.

 

[bigwow]

Care to be more specific, Bigwow ? I am looking for cable clips that will secure two wires each ~14mm dia to a typical boaty style interior and would really prefer specific recommendations based on peoples actual experiences.

Thanks,

Boo2

http://cpc.farnell.com/jsp/search/b...etricAttributeId=&prevNValues=411+2005+205282

 

[Rigger Mortice]

Ahhh, you want P clips http://www.ebay.co.uk/itm/like/260423542132?hlpht=true&ops=true&viphx=1&lpid=95&device=c&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0&ff12=67&ff13=80&ff14=95 This is what I use on a regular basis, strong and easy to use.

I've used those. As you say strong and easy to use. You can also get them in stainless steel.

 

[prv]

I've never seen a double P clip (I guess more like a B clip) although in this case the size allows David and Hadenough's ingenious plumbing solution. What I've done in the past is use two P clips "back to back", with one screw going through both of them. Or (for slightly smaller cables) screw-down cable tie mounts and a big cable tie round both of them.

Pete

 

[coopec]

I've used PVC cable ducting for all my cable runs. Is that not a solution?

http://www.ecvv.com/product/3898735.html