Tuph winches

[warrenmarkus1]

Hi,
I have Tuph fittings bottom action Tufnel primary winches on my '71 Seamaster 23', and am looking for the springs that push the locking lugs out, as the originals have broken up, and winch no more!
Anyone got any ideas where I could get these bits
Ta
W


<hr width=100% size=1>

 

[bob26]

I also have a pair of these winches and would be interested in supply of springs.

Its possible Barton Marine (who used to make tufnol winches) might be able to help - I found they were very helpful when I e-mailed them.

I'd be interested to know what the handles on your winches are like as I don't have any for mine. I've worked out they must be about quarter of an inch thick and an inch and a quarter wide - probably with a forked end and with some sort of recess in the side to lock them into the slot.

How long are they and what is the handle end like? And what are they made of? Barton make something very similar in chrome plated brass with a black knob seen here:

http://www.bartonmarine.com/html/winch_Handles.htm

<hr width=100% size=1>