Trying to find a large cleat to replace an old one

[UK-WOOZY]

Trying to find a new cleat with the below hole widths please. if anyone can find one please. many thanks. i beleive its for my sailspar furler as other jeanneau sundream owners im in touch with dont have this. it was mounted on the port side deck near the stern but the previous owners hadnt used sealant in the holes. thanks


EDIT-

would this one be ok, i think the holes are 50mm apart?
https://marinestore.co.uk/plb70300.html

 

[lw395]

http://www.harken.co.uk/productdetail.aspx?id=5478&taxid=390
Reassuringly expensive.
Twice the holding power of the Barton.

Try also Holt, Nautos, Allen, Ronstan
Sailboats and pinbax are the go to chandlers for this sort of thing, but a bit dinghy biased.

 

[coopec]

Well there's a few here for $A8.35 but maybe they are rubbish and not the same size.

https://www.ebay.com.au/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=cam+cleat&_sacat=0

Clive

 

[UK-WOOZY]

thank you thus far for the replies.

i beleive the cleat is for the sailspar furler which has a continuous rope