Trouble identifying Lofrans crimp terminals

[Jokani]

Lofrans support must be the worst ever, no response to numerous requests for help.

I messed the crimp terminals in the block connections to the back of a Lofrans Windlass Counter, pictured here:

I need to redo them and have tried to source the correct type of crimp terminal. I have found some similar, but all that I have ordered have been too small.

Can anyone point me in the right dirction of a terminal that would fit?

TIA

 

[Tranona]

Have you tried Peachments, the Lofrans UK distributor. You won't get much sense out of the factory!

 

[Jokani]

Have you tried Peachments, the Lofrans UK distributor. You won't get much sense out of the factory!

Thanks for the tip, I have just emailed them.

 

[philwebb]

Try Radiospares (RS components) They have an online catalogue.

 

[matthewriches]

If you’re still struggling then I can pop a handful in the post.

 

[Jokani]

Try Radiospares (RS components) They have an online catalogue.

The Molex ones in the picture came from RS, unfortunately I can't see any bigger ones., I also emailed them with a picture but they replied with a 'it's hard to be sure' email, so a dead end I would think. Thanks anyway.

 

[Jokani]

If you’re still struggling then I can pop a handful in the post.

Thanks Matthew, I am struggling, I have been on the case for a few weeks now, as well as the ones in the pic I ordered some others from Ebay, none were the right size. I would be more than happy to pay for some. I will PM you.

 

[matthewriches]

Got your PM. Can meet you in Ipswich, Harwich or I'm in Shotley on and off over the next few weeks.

Thanks Matthew, I am struggling, I have been on the case for a few weeks now, as well as the ones in the pic I ordered some others from Ebay, none were the right size. I would be more than happy to pay for some. I will PM you.