Transom PVC Buffer moulding

N

nimbusgb

Well-Known Member
Joined
22 Oct 2005
Messages
10,058
Location
A long way from my boat! :(
www.umfundi.com
After purchasing 4.5m of PVC/vinyl/rubber moulding ( in Levkas ) and applying it to the transom lip of Cariad last season, the boat was taken for a sail ........... before the buffer was glued on.

Buffer now with Davey Johnes!

Is there a direct supplier here in the UK that someone is aware of? I'm looking for a length of 4.5m with an approximately 15mm wide slot, D / oval profile about 50mm wide and 35-40mm thick.

Found Wilks -- http://www.wilks.co.uk/

Any offers on £45 for 5m? ( 1/2 what I paid in Levkas :( )

£20!!!! for delivery though!
 
Last edited:
Wilks in Tollesbury are about the easiest supplier and very helpful to boot. If you were ordering via a trade account (Chandler or boatmender mate) the price would come down substantially.
I had a similar problem on my Dehler and went to the trade counter where parted with a tenner for 4m of bumper c profile !

 
GrumpyOldGit said:
Wilks in Tollesbury are about the easiest supplier and very helpful to boot. If you were ordering via a trade account (Chandler or boatmender mate) the price would come down substantially.
I had a similar problem on my Dehler and went to the trade counter where parted with a tenner for 4m of bumper c profile !
Click to expand...

Thanks for that. Another forumite is coming my way and has offered to pick some up on the way past so it may work out cheaper yet!
 
You must log in or register to reply here.

Share this page

Top