The apparent wind and True wind indicators keep flashing on and off on my St60+ wind

Max K

N/A
Joined
16 Feb 2015
Messages
1,607
Location
Central England, towards Birmingham
Visit site
on what appears to be "Apparent" the speed is shown but on pressing the button, three bars appear. My first thought was a lack of speed input from the adjacent Tridata but on replacing the ST cables there was no change. At the same time, both ST40s used as chart table repeaters have gone blank. These seem to be receiving some data when checked with a multimeter.

Max.

.
 

no3l

New member
Joined
17 Mar 2010
Messages
12
Visit site
Hi

Have a look at the post by Sailfree "Problems with raymarine instruments". I followed his suggestions and they fixed my problems which were similar to what you describe.

Rgds
Noel
 
Top