Stowe Micro 200 echo sounder transducer

chasmoore

New member
Joined
19 Aug 2001
Messages
24
Location
Essex, UK
Visit site
My echo sounder became unreliable and now flashes 0.0. The book says this is probably a transducer problem. Does anyone know where I can get a transducer compatible with the Stowe Micro 200??
 

Viscount

Member
Joined
12 Nov 2003
Messages
458
Location
Scotland
Visit site
I got some Stowe parts from the company below who have taken over the business (I think). Hope that helps.

A.W.MARINE
Marine Electronics

Haslar Marina, Haslar Road,
Gosport, Hampshire
England PO12 1NU

Telephone: +44(0)2392 501207
Stowe Marine Enquries: +44(0)2392 504253
Mobile: +44(0)7831 378039
Fax: +44(0)2392 501534

e-mail: info@awmarine.com
 

brianhumber

New member
Joined
30 May 2001
Messages
1,365
Location
Sussex
Visit site
Yes you can get parts from AW Marine but be prepared for sky high prices - see lots of other threads on this subject about him.

As it happens I have just returned from tracing 00 on my Stowe, any volt drop due to bad connections gives this - would advise you to check through and make sure all connections are good - I find the ability to measure deep depths gets less and less over a few years, I tend to have a workover when I cannot get over 20m reading or i get 00 on start up for long periods.

Bri
 
Top