Sticky for industrial vinyl

[Gordonmc]

The cockpit sole-boards on the boat are good quality (old) marine ply with sections of treadmaster glued (with various degrees of success) on the upper surface.
My cunning plan was hatched when a friend gave me some industrial grade flooring vinyl impregnated with non-slip mica. Its the stuff they use on train footplates.
What are the recommendations regarding a goop to stick it down with?
I don't want to use epoxy as if the project goes tits up I want to be able to start from scratch.
Polysulphide from B&Q?
Sikaflex?

 

[vyv_cox]

Sikaflex 291 should be good. Treadmaster recommend either this or their epoxy. About three years ago I put TBS non-slip on my cockpit floor. It came with Sikaflex that has worked well.