Stewart Turner part wanted

[cowpat]

I am looking for a part for the RM3. I think it was the smallest two stroke stewart turner made and was possibly 1 1/2hp. it`s the exhaust cower plate with STEWART cast into it and with four 2 3/8in pcd studholes that I require Any ideas I would be gratefull to hear. I am restoring for someone who wants it for a colection.
CHRIS(cowpat)


<hr width=100% size=1>

 

[Chris_d]

I used to have one of those 20 odd years ago, super little engines that would run forever but a bugger to start. Think you might be struggling for that part though, you will have to trawl around boat jumbles etc..., there was a couple of Stuart engines on www.boatsandoutboards.co.uk recently, someone might have some bits.
You could also try Stuart turner themselves, they are still in buisness in Henley On Thames, but only make pumps now.

<hr width=100% size=1>

 

[miket]

Also try Fairways Marine.

<hr width=100% size=1>