Stay-lok swageless terminal

[tim3057]

Can anybody reccommend a site, or give me a quick guide, as to how to fit the end of a new forestay into one of those s/s DIY terminals with a cone inside? I have the old one, but it's a bit of a mess.

Many thanks

 

[KREW2]

Hi
Try this http://www.s3i.co.uk/swagelesstechnical.php
Hope this works
KW

 

[colvic987]

http://www.stalok.com/index1.asp?fitting=True

 

[sailorman]

STA-LOK TERMINALS LTD
Unit 6, Causeway End, Station Road, Lawford, Essex, CO11 1AA, England
Tel: +44 (0) 1206 391509 Fax: +44 (0) 1206 395286
Email: info@stalok.com Web: http://www.stalok.com

 

[alahol2]

If you don't replace the fitting, at least replace the cone. They are available separately.

 

[jimboaw]

Tight Wads use Hi Mod swageless fittings. No need for a new cone. Don't fill the fitting up with any sort of mastic when you re- assemble Current wisdom is that you are more likley to get crevice corrosian if you do.

 

[Talulah]

I use Hi-Mod http://www.petersen-stainless.co.uk
Excellent service. Friendly bunch of people.

 

[Strathglass]

Look at the peterson site already listed. They have a video on their site showing how to assemble their swegeless terminals.

I used peterson for the swegeless terminals at the bottom and S3i far all the wire and the upper t-ball terminals.

I found that to be the most cost effective and both are very good in customer support.

Iain

 

[tim3057]

Thanks everyone for yr help