Standard Horizon CP300 input connection settings

[Hadenough]

Seems to be CP300 day today! I had to reset the RAM on my unit today and have lost the AIS input. I have an AIS engine with a separate aerial, there is no VHF / DSC or any other connections. The manual says to set port 4 to AIS38400 in Advanced Set Up - In / Out connections. I've done that and tried all the other ports to but still no AIS. Any ideas?

 

[nigelmercier]

What port does the AIS connect to? This is the one you need to set to 38400.

 

[Hadenough]

Nigel, thanks, success . Just checked and the AIS connection is to the blue wire, port 1. Changed the setting and bingo!

 

[nigelmercier]

Good stuff. Now you have it working, and when all the others settings are as you like them, take photographs of all the setup screens.

 

[Gwylan]

Good stuff. Now you have it working, and when all the others settings are as you like them, take photographs of all the setup screens.

Excellent idea!

 

[Leighb]

Good stuff. Now you have it working, and when all the others settings are as you like them, take photographs of all the setup screens.

Or write it all down on the back page of the manual.

 

[nigelmercier]

Or write it all down on the back page of the manual.

Writing something down, how retro. I've got pictures of my settings saved in the same folder as the PDF of the manual.