Spartite

[Lightwave395]

Anyone used it ? I've just cleared and cleaned the mast and deck plate ready to pour tomorrow, the gap at the front of the mast is quite wide so I've made a thin plywood cover to push up and seal underneath. I'm somewhat paranoid about blue liquid running everywhere, once I've poured there's no going back...!
Any tips welcomed

 

[wilkinsonsails]

Tape it up well . It seems to go off quite quickly in warm weather. We use thin ply and butyl tape to seal larger gaps underneath. Make sure that if you want to remove mast later one side ,Collar or mast has a release agent Otherwise you may have undo the deck ring .?