Snapdragon 23 / Dolphin Mk7

[JSB]

Hi Folks

I am swapping engines for a friend, I have taken out a Dolphin Mk5 and am replacing it with a Mk7. Unfortunately the engine mountings and the drive arrangement are different necessitating a lowering of the engine by 3 or 4 inches. This in turn means cutting away some of the engine space floor structure. If anyone has, or knows someone who has a Snapdragon with a Mk7 fitted I would be interested in communicating.

Regards

John

<hr width=100% size=1>

 

[Guest]

My Snap 23 had about 1-2" space between the inner moulding and hull.
I looked at changing my Vire out and I would have had to cut away part of the bulkhead below the washboards ...... plus changing the angle of shaft exit .......

Just a comment - not trying to be a B !!!


<hr width=100% size=1>Nigel ...
Bilge Keelers get up further ! I came - cos they said was FREE Guinness !
/forums/images/icons/cool.gif