Small pieces of A4 stainless steel required

LORDNELSON

New member
Joined
6 Sep 2002
Messages
908
Location
West Sussex, England
Visit site
I need to locate two pieces of stainless steel sheet of A4 specification. Size about 100x100x3 mm. Can anyone point me in the right direction? Preferably in the West Sussex/East Hampshire area. Thank you.
 

Thistle

Well-known member
Joined
2 Oct 2004
Messages
3,943
Location
Here
Visit site
Any manufacturers / installers or commercial kitchens near you? Likely to be cheaper than any boaty source. One of the lads in our local place made up a pair of dinghy fairleads for me one lunchtime and had to be persuaded to accept the price of a couple of pints.
 

philmarks

Member
Joined
16 May 2001
Messages
718
Location
New Zealand
www.blue-hound.com
Solent Chandlery in Gosport (yellow building on A32 RHS just before Campers) has usually got A4 odd pieces (you need to ask to go upstairs, but don't need an old raincoat ;-)). When I'm there I just pick up a few bits and add them to my collection.
 

Becky

New member
Joined
10 Nov 2003
Messages
2,130
Location
Hampshire
Visit site
If you pop into see Chris at Chi marina, he is next door to Chris Holman (the rigger), he will supply what you need very reasonably. I use him all the time for those little jobs in metal, he is a really nice guy. But send your wife for the best service! /forums/images/graemlins/grin.gif
 

jfm

Well-known member
Joined
16 May 2001
Messages
23,794
Location
Jersey/Antibes
Visit site
Ageed. Chris in that shed at Chi is excellent. He made lots of bits for us. Nice folk and excellent s/s fabrication work, and good prices
 
Top